Scientific Production

Determination of vehicle emission factors under real conditions – case study: in the peri-urban areas of the Regional Crown of Mexico.

Student: Antonio Mogro

Degree: PhD

Use of information technologies to reduce fuel consumption in fleet vehicles.

Student: Michael Daniel Giraldo

Degree: PhD

Methodology for the generation of integrating public policies focused on the mitigation and adaptation of climate change at the municipal level (urban areas) through energy efficiency and renewable energy.

Student: Roberto Barraza

Degree: PhD

Power train optimization of hybrid vehicles.

Student: Daniel Cordero

Degree: PhD

Volatile organic compounds in Tijuana and Mexico city: measurements and source apportionment.

Student: Jessica Garzón

Degree: PhD

Methodology to include the effect of the torque of tightening on bolted joints using finite element simulations.

Student: Natalia Navarrete

Degree: PhD

Study of the evaporation of sessile droplets of binary liquid mixtures on a heated horizontal surface.

Student: Nicolás Giraldo

Degree: PhD

Air quality modeling in an open pit mining area.

Student: María Elena Huertas

Degree: PhD

Oxy-combustion to reduce NOx emissions and CO₂ capture costs.

Student: Favio Solano

Degree: MSc

Modeling of air conditioner for CFD to energy savings in urban bus cabin.

Student: Javier Eduardo Aguirre

Degree: MSc

Cooking time reduction and energy efficiency improvement of a conveyor oven for pizza.

Student: David de Jesús Mastrascusa

Degree: MSc

Effect of solar radiation on the dispersion of atmospheric contaminants.

Student: David Sebastian Martínez

Degree: MSc

Reduction in consumption of fuel through the optimization of the drive train in cast vehicles.

Student: Raúl Náteras

Degree: MEng

Effect of the use of etanol-gasoline blends in the mechanical, energy and environmental performance of vehicles.

Student: José Edgardo Niño

Degree: MEng

Origin of the yellow spots in new Nissan vehicles.

Student: Arturo Suarez

Degree: MEng

Design of low-bed chassis type for vehicles of urban freight distribution.

Student: Esteban Lora

Degree: MEng

Design and implementation of a system of PVC foams for automotive applications at the pilot plant level.

Student: John Jairo Pabón

Degree: MEng

Use of control charts to identify variations in the process of diameter milling of 6.4 L (V8) crankshaft stumps in the machine GFM FKP-20/2-7020.

Student: Diana Carolina Dulcey

Degree: MEng

Experimental validation of a CFD model for a heat exchanger (IHX) applied in the Ford automotive cooling systems.

Student: Paul Montufar

Degree: MEng

Model for estimating emissions from diesel vehicles using ECU information.

Student: Diego Eder Escudero

Degree: MEng

Methodology to determine the impact area of not paved roads using CFD.

Student: Daniel Fernando Prato

Degree: MEng

Crankshafts design.

Student: Michael Daniel Giraldo

Degree: MEng

Numerical simulation of the effect of bolted unions on automotive components.

Student: Germán Gutiérrez

Degree: MEng

Model for estimating instant mass emissions of atmospheric contaminants based on operation parameters of diesel-based motor vehicles.

Student: Marcelo Xavier Estrada

Degree: MEng

Characterization of lithium ion batteries.

Student: Gina Ramírez

Degree: MEng

Methodology to incorporate the effects of electronic components in fatigue of automotive brackets, using fem analysis.

Student: Juan David Uribe

Degree: MEng

Correction of the vertex model in the calculation of the molar concentration of nitrogen oxides in the exhaust gases of Otto-cycle engine.

Student: Marco Antonio Pardo

Degree: MEng

Evaluation of mechanical, energy and environmental performance of vehicles.

Student: Gustavo Alvarez

Degree: MEng

Determination of typical driving cycles for the case of buses covering fixed routes.

Student: Karem Cedillo

Degree: MEng

Comprehensive system of monitoring and diagnosis of high-voltage lines. Communication, sensors and power module.

Student: Jorge Couvert

Degree: MEng

Validation of a model for the estimation of performance in internal combustion engines.

Student: Esteban Oliveros

Degree: MEng

Re-design of v6 crankshaft.

Student: José Alberto Goñi

Degree: MEng

Design of a crankshaft fatigue test bank.

Student: Felipe Sánchez

Degree: MEng

Design of the filter and pump system of a diesel vehicle.

Student: Alejandrina Berenice Navarro

Degree: MEng

Autonomous system registration of operating conditions of vehicles in use.

Student: Oscar Calle

Degree: MEng

Engine laboratory.

Student: Julián Echeverry

Degree: MEng

Modeling of the dispersion of particulate material using CFD.

Student: Eloy Vilchis

Degree: MEng

Control of greenhouse gas CO₂ capture by oxy-combustion in internal combustion engines.

Student: Juan Manuel García

Degree: MEng

Tensor-based polymers replacement of metal springs.

Student: Jesús Miguel Cuevas

Degree: MEng

Analysis of the connection between the suspension and chassis of a van to reduce the transmission of vibrations.

Student: Francisco de Paula Ibarrola

Degree: MEng

Design and construction of an H₂S filter for biogas used in internal combustion engines.

Student: Sebastían Izquierdo

Degree: MEng

Redesign of mixers to control the loss of power by altitude in gas engines.

Student: Jonathan Román

Degree: MEng

Simulation of the Dispersion of pollutants in an open-sky coal mine by applying the CALPUFF model.

Student: Dumar Camacho

Degree: MEng

Quantification of the emission of particulate matter by the action of the wind effect.

Student: Enrique Darinel González

Degree: MEng

Quantification of the emission of particulate matter by the action of the wind effect.

Student: Enrique Darinel González

Degree: MEng

Analysis and improvement of the quality of the sound of a car lock.

Student: Eloy Ernesto Camargo

Degree: MEng

Data transmission in electromagnetic fields created in high voltage lines.

Student: Roberto Barraza

Degree: MEng

Simulator of diesel engines for the diagnosis of ECM´s.

Student: Natalia Navarrete

Degree: MEng

Instrumental system for determining fuel consumption in track tests.

Student: Agustín Huacuz

Degree: MEng

Measurement of vehicle emission on track tests.

Student: Gerardo Ivan Moya

Degree: MEng

Use of vehicle verification results to determine vehicle emission factors.

Student: Efrén Mendoza

Degree: MEng

 Efforts concentrators in flat plates of composite materials.

Student: Brisa Fabiola Bañuelos

Degree: MEng

Model of dispersion of contaminants around point sources. Gaussian method.

Student: Diego Moreno

Degree: MEng

Model of dispersion of contaminants around point sources. Numeric simulation.

Student: Mauricio Yilmer Carmona

Degree: MEng

Determination of driving cycles in Mexico City.

Student: Alfredo Valdez

Degree: MEng

Design and construction of a functional prototype of electric vehicle for transportation of UNAB passengers.

Student: Jessica Maradey

Degree: PhD

Development of instrumentation for evaluating the mechanical, energy and environmental performance of motor vehicles.

Student: Eduardo García

Degree: MSc

Optimization of an instrumental system to identify noise in motor vehicles.

Student: Javier Mauricio Antelis

Degree: MSc

Study of the process of tempering by CFD.

Student: Amayrani López

Degree: MEng

Modelling of the dispersion of atmospheric contaminants through CFD considering heat transfer.

Student: Edwin González

Degree: MEng

Development of PVC foam with high insulation and impact absorption capacity.

Student: Francy Andrea Alvarado

Degree: MEng

Concentration of pollutants due to vehicle emissions in Maracaibo.

Student: Analí Machado

Degree: PhD

Energy efficiency in fleet vehicles.

Student: Felipe Quirama

Degree: PhD

Optimization of the operation of bioreactors in the biological fermentation process.

Student: Ronald Valencia

Degree: MEng

Technical-economic feasibility of turning GNCV system automotive Park to the police service.

Student: Nicolas Giraldo

Degree: MEng

Methodology for mechanical, energy and environmental evaluation of motor vehicles modifications.

Student: Luis Ernesto Muñoz

Degree: MEng

General methodology for audit maintenance programs.

Student: Leonora de Lemos

Degree: MEng

Effect of altitude on CO emissions in the natural gas step water heaters.

Student: Alexander Valencia

Degree: MEng

Exploration of alternatives for the use of pure oxygen on feeders to reduce lost of power in gasoline internal combustion engines converted to natural gas.

Student: Juan Fajardo

Degree: MEng

Destruction of CFC-12 by incineration with Natural Gas.

Student: Carol Beatriz Ochoa

Degree: MEng

Noise removing in motor vehicle cabins.

Student: Juan Pablo Pozada

Degree: MEng

Implementation of an alternative to avoid loss of power in natural gas vehicles in Bogota.

Student: Diego Alejandro Arias

Degree: MEng

Evaluation of the performance of boilers converted to natural gas.

Student: Jair Meza

Degree: MEng

Implementation of analytical methods for the measurement of concentration of SOx and NOx in fireplaces.

Student: Sonia Cristina Insignares

Degree: MEng

Effects of load of a diesel engine on the morphology of the emitted particles.

Student: Juan Carlos Serrano

Degree: MEng

Design and construction of a particulate trap of diesel vehicle emissions.

Student: Juan José Trujillo

Degree: MEng

Energy use and environmental assessment of the furnaces combustion products of the SLI fluorescent lamps production plant in Colombia.

Student: Wilson Contreras

Degree: MEng

Detection of flaws in ball bearings in electric motors, using spectral analysis of vibration, noise and stator current.

Student: Alberto Martelo

Degree: MEng

Dynamic optimization of a system for the fumigation of flowers in greenhouses.

Student: Alexander Valencia

Degree: MEng

PEBD incineration.

Student: Fernando Baez

Degree: MEng

Diagnosis of electric motors by means of spectral analysis.

Student: Helmer Acevedo

Degree: MEng

Incineration of prohibited refrigerants.

Student: Hugo Caballero

Degree: MEng

Control of gaseous emissions from a friction-materials plant.

Student: Raul Amazo

Degree: MEng

Design, construction and implementation of a combustion of plastics tests bank.

Student: Edgar Salazar

Degree: MEng

Development of an automatic spraying machine.

Student: Juan Esteban Tibaquirá

Degree: MEng

Design and construction of a system of low volume spraying.

Student: Jorge Mario Ramírez

Degree: MEng

Measurement of air quality through analytical methods.

Student: Mónica Pinzón

Degree: MEng

Automation of the calibration process for natural gas meters.

Student: Julian Arturo Varela

Degree: BEng

Disposal and recycling of catalytic converters.

Student: Peter Ranchen

Degree: BEng

Optimization of the sulfur sublimators used in greenhouse roses cultivation.

Student: Julian David Rodriguez

Degree: BEng

Effect of altitude on emissions of CO in natural gas step water heaters.

Student: Juan Camilo Serrano

Degree: BEng

Control of CO emissions in step water heaters.

Student: Maria Margarita Gutierrez

Degree: BEng

Open atmosphere evaporation models.

Student: Fabrizio Moreno

Degree: BEng

Tests for the evaluation of the mechanical condition of a vehicle fleet.

Student: Fabian Steven Sarmiento

Degree: BEng

Profiling of roads emissions.

Student: Andrés Toro

Degree: BEng

Numerical simulation analysis of the processes of sublimation and evaporation of substances to open atmosphere.

Student: Juan Manuel Caro

Degree: BEng

Experimental determination of the optimal geometry of evaporators exposed to open atmosphere.

Student: Juliana María López

Degree: BEng

Electricity generation from biogas.

Student: Ivan Alejandro Molano

Degree: BEng